comfortdesign.in

Tom Fisher Tom Fisher

0 Course Enrolled • 0 Course Completed

Biography

Echte 2V0-15.25 Fragen und Antworten der 2V0-15.25 Zertifizierungsprüfung

Um die Interessen zu schützen, bietet unsere Website die online Prüfungen zur VMware 2V0-15.25 Zertifizierungsprüfung von ExamFragen, die von den erfahrungsreichen IT-Experten nach den Bedürfnissen bearbeitet werden. Sie werden Ihnen nicht nur helfen, die VMware 2V0-15.25 Prüfung zu bestehen und auch eine bessere Zukunft zu haben.

VMware 2V0-15.25 Prüfungsplan:

Thema
Einzelheiten

Thema 1

Plan and Design the VMware by Broadcom Solution: This domain addresses architectural planning and design principles for creating scalable, secure virtual environments aligned with business requirements.

Thema 2

VMware by Broadcom Solution: This section focuses on understanding VMware by Broadcom's virtualization and cloud infrastructure platform for managing modern enterprise workloads.

Thema 3

Troubleshoot and Optimize the VMware by Broadcom Solution: This domain focuses on troubleshooting VCF deployment, upgrades, conversions, workload domains, fleet operations (certificates, passwords, identity), licensing, compute resources, storage (vSAN, supplemental storage), networking (VDS, NSX), VCF Operations tools, Identity Broker automation, and HCX workload migrations.

Thema 4

Install, Configure, Administrate the VMware by Broadcom Solution: This area covers installing, configuring, and managing VMware solutions including VCF Fleet deployment, expansion, and reduction operations.

Thema 5

IT Architectures, Technologies, Standards: This domain covers fundamental frameworks, tools, and best practices for building scalable, secure, and interoperable enterprise IT systems.

>> 2V0-15.25 Fragen Beantworten <<

2V0-15.25 Zertifizierungsprüfung, 2V0-15.25 Zertifizierungsantworten

Es existiert viele Methoden, sich auf die VMware 2V0-15.25 Zertifizierungsprüfung vorzubereiten. Unsere Website bietet zuverlässige Trainingsinstrumente, mit denen Sie sich auf die nächste VMware 2V0-15.25 Zertifizierungsprüfung vorbereiten. Die Lernmaterialien zur VMware 2V0-15.25 Zertifizierungsprüfung von ExamFragen enthalten sowohl Fragen als auch Antworten. Unsere Materialien sind von der Praxis überprüfte Software. Wir werden alle Ihren Bedürfnisse zur IT-Zertifizierung abdecken.

VMware Cloud Foundation 9.0 Support 2V0-15.25 Prüfungsfragen mit Lösungen (Q22-Q27):

22. Frage
An administrator has observed that the vSphere Global Inventory is only available from the management domain vCenter. The Global Inventory is not available from the workload domain's vCenter.
Why is the "Global Inventory" missing from the workload domain's vCenter?

A. An inventory sync was not run following the workload domain creation.
B. An external VIDB instance has not been configured.
C. Supervisor Management has not been enabled.
D. VCF SSO and vCenter Linking have not been configured.

Antwort: D

Begründung:
TheGlobal Inventory List (GIL)is only available whenmulti-vCenter SSO domain linkingis configured. In VMware Cloud Foundation, themanagement domain vCenteris deployed first and becomes theroot vCenter for global inventory data. For workload domains, their vCenter Servers must beregistered into the same SSO domainandlinkedwith the management-domain vCenter in order for the global inventory data (VMs, hosts, clusters, content libraries) to appear.
If a workload domain vCenter is not SSO-linked, it operates in its own identity domain, and thereforecannot access or present Global Inventory, resulting in exactly the symptom described: the management domain vCenter shows the GIL, while the workload domain vCenter does not.
Option B (Supervisor Management) relates to vSphere with Tanzu and has no impact on Global Inventory.
Option C (inventory sync) is incorrect-there is no manual sync required; GIL relies entirely on SSO linking.
Option D (VIDB) is not related to vCenter linking or inventory visibility; it is used by VCF Identity Broker.
Therefore, the reason the Global Inventory is missing from the workload domain vCenter is thatSSO/vCenter Linking has not been configured, which is required for federation across all VCF vCenters.

23. Frage
After upgrading from VMware Cloud Foundation (VCF) 5.2 to VMware Cloud Foundation (VCF) 9.0 the administrator attempts to enable SSH access through the vCenter console to the newly upgraded VCF Ops instance and Is not able to. They attempt to log in through SSH as the root user and they are unable to. What needs to be done to enable SSH access to the VCF Ops instance?

A. Reboot the appliance and enable SSH.
B. Reset the root password.
C. Use VCF Operations to remediate the password
D. Rollback to snapshot because the upgrade did not work as expected.

Antwort: C

Begründung:
InVMware Cloud Foundation (VCF) 9.0, the management of appliance credentials and lifecycle operations is centralized within theVCF Operations Fleet Manager(which subsumes the roles of the legacy SDDC Manager Life Cycle Management).
* The Problem:The administrator is unable to log in as root via the console or SSH. This indicates a credential synchronization issue or account lockout, which prevents them from manually enabling SSH via the console (the traditional method).
* The Solution (Remediate Password):The "Remediate Password" workflow in VCF Operations allows the administrator to reset and synchronize the root password for VCF components (like the VCF Ops instance itself) directly from the management plane.
* By navigating toFleet Management > Passwords(or similar path in VCF 9.0), the administrator can select the affected instance and chooseRemediate.
* This process updates the password in the centralized database and on the appliance, restoring the ability to log in.
* Once the root access is restored via remediation, the administrator can then proceed to enable SSH (either via the VCF Operations settings UI or the console). Without the correct password (which "Remediate" fixes), SSH cannot be enabled.
Note: Options A and B (Reset/Reboot) are legacy manual steps that do not ensure the VCF inventory database is updated, potentially leading to further "configuration drift" or sync errors. Option C is unnecessary for a credential issue.

24. Frage
An administrator is troubleshooting a problem with NSX.
Which command can be used to validate installed NSX VIBs on the ESX host?

A. nsxcli get version
B. esxtop -b -d 2 -n 100
C. esxcfg software list
D. esxcli software vib list

Antwort: D

Begründung:
When troubleshooting NSX on an ESXi host, VMware requires verification that NSX VIBs (vSphere Installation Bundles) are installed and in the correct state. VIBs are responsible for NSX datapath, control- plane modules, and kernel extensions on ESXi. The authoritative and documented method to list VIBs on an ESXi host is the command:
esxcli software vib list
This command displays all installed kernel modules, version numbers, NSX packages, and their installation status. For NSX-T (now part of VCF networking), administrators expect to see VIBs such asnsx-aggservice, nsx-bridge,nsx-esx-datapath, and others. If any required NSX VIBs are missing or inconsistent, the ESXi host will fail to join NSX transport nodes or will show "Not Ready." Option A (esxtop) is for performance monitoring and does not show VIB information.
Option C (nsxcli get version) checks NSX version on Edge Nodes or host transport nodes butdoes not list VIBs.
Option D (esxcfg software list) is an outdated and invalid command.

25. Frage
An administrator wants to expand a VMware vSAN cluster in a workload domain by adding an unassigned host from the vSphere client. However, at the Host Selection screen no hosts are available and the following message displayed:
No unassigned hosts available with storage type VSAN. Commission hosts with physical NICs 0 & 1 to Add Host from UI.
How can the administrator commission hosts?

A. From the vSphere client by navigating to Supervisor Management.
B. From the SDDC manager by navigating to Workload Domains.
C. From VCF Operations by navigating to Fleet Management.
D. From the vSphere client by navigating to the Global Inventory.

Antwort: B

Begründung:
In VMware Cloud Foundation 9.0,host commissioningis performed exclusively throughSDDC Manager, not from the vSphere Client. When expanding a vSAN cluster inside a workload domain, all ESXi hosts must first be placed in anUnassignedstate and thencommissionedin SDDC Manager before they can appear in the "Add Host" wizard of the vSphere Client. The message in the problem-"No unassigned hosts available with storage type VSAN. Commission hosts with physical NICs 0 & 1 to Add Host from UI"-indicates that SDDC Manager has not yet commissioned any suitable hosts with the required NIC layout.
VCF 9.0 documentation states that for workload domain expansion, hosts must be commissioned under:
SDDC Manager # Workload Domains # (Select WLD) # Hosts # Commission Hosts.
This validates hardware, storage type (such as vSAN ESA or OSA), NIC placement, and ensures the host is compatible with the domain's configuration.
Options pointing to vSphere Client (A, D) or VCF Operations (B) do not perform the commissioning workflow. Therefore, the correct and verified answer isC, the only interface where host commissioning is officially supported.

26. Frage
An administrator attempts to add a new user (provideradmin05) within the VMware Cloud Foundation (VCF) Automation Provider Management Portal, however provideradmin05 cannot be found for import.
The following information is provided:
* The existing VCF Fleet uses VMware Identity Broker (VIDB) for single sign-on.
* VIDB uses Active Directory as the identity provider.
* A group named VCFA_ProviderAdmins was created in Active Directory, populated with the appropriate user accounts and synchronized with VIDB.
* Five days later provideradmin05 was added to VCFA_ProviderAdmins.
What will resolve this issue?

A. In VCF Operations, disable VCF SSO for VCF Automation.
B. In the VCF Automation Provider Management Portal, enable the Advanced Rights Bundle Mode.
C. In the VCF Automation Provider Management Portal, import provideradmin05 as an LDAP user.
D. In VCF Operations, manually resync the directory.

Antwort: D

Begründung:
VMware Cloud Foundation (VCF) 9.x usesVMware Identity Broker (VIDB)as the central identity provider for the entire VCF fleet. VIDB synchronizes user and group metadata from the connected enterprise identity source, in this caseActive Directory. When a user is added to an AD groupafterthe group was already synced into VIDB,VIDB does not automatically resync group membership on demandunless a directory synchronization is performed.
In this scenario, the groupVCFA_ProviderAdminswas synchronized five days earlier. When the new user provideradmin05was later added to the AD group, VIDB-and therefore the VCF Automation Provider Management Portal-does not recognize that new user until amanual directory resynchronizationoccurs fromVCF Operations.
This operation forces VIDB to:
* Requery Active Directory
* Update group membership information
* Repopulate available users for import into VCF Automation
Options B and D are incorrect because they donotinfluence Identity Broker directory synchronization. Option C (disable VCF SSO) would break authentication and is not a valid solution.

27. Frage
......

Wollen Sie größere Errungenschaften in der IT-Branche erzielen, dann ist es richtig, ExamFragen zu wählen. Die Schulungsunterlagen zur VMware 2V0-15.25 Zertifizierungsprüfung aus ExamFragen werden von den erfahrenen Experten durch ständige Praxis und Forschung bearbeitet. Sie verfügen über hohe Genauigkeiten und große Reichweite. Haben Sie die Schulungsunterlagen zur VMware 2V0-15.25 Zertifizierungsprüfung aus ExamFragen, dann haben Sie den Schlüssel zum Erfolg.

2V0-15.25 Zertifizierungsprüfung: https://www.examfragen.de/2V0-15.25-pruefung-fragen.html

Follow us

Tom Fisher Tom Fisher

Biography

FOLLOW US ON:

Quick Links

Get In Touch